Planet Technology DVR-1670 - Manual (Page 44)

5.6 Video Parameters Setup
For different camera and different background, in order to get the best video image, you need
to adjust video parameters such as brightenss, saturation, contrast and hue, etc.
You can setup the camera individually, and also you can copy the video parameters of one
camera to any other cameras. Here are the setup steps
Step 1 Enter into “Image Setup” menu
Step 2 Select camera Please use З И keys to select one camera.
Step 3 Adjust brightness, contrast, saturation and hue Move “Active Frame” to the
“Adjust” button on the right side of Brightness, Contrast, Saturation and Hue, press
ENTER key, you will enter into the corresponding adjust interface. In the adjust
interface, there is one scroll bar at the bottom, you can use З И keys to adjust and
can find the video image will be changed at the same time. When you are satisfied
with the real time video image, press ENTER to return “Image Setup” menu.
Step 4 You can copy the video parameters of current camera to any other cameras. Or you
can repeat setp2 and step3 to adjust for any other camera.
After adjust, in “Image Setup” menu, press “Confirm” button to save parameters and make
them into effective. Otherwise, perss “Cancel” button or ESC key to abort modification.
Page 44