National 383 sio control sub-menu (advanced menu), Legacy usb support (advanced menu), Boot-time diagnostic screen (advanced menu) – Phoenix Gold pmn User Manual
Page 101: Reset configuration data (advanced menu), Power on boot beep (advanced menu), National 383 sio control
BIOS Utilities
Advanced Menu 5 - 9
5
National 383 SIO Control Sub-Menu (Advanced Menu)
Pressing Enter here will provide a sub-menu that controls the configuration
of various National 383 SIO devices.
Legacy USB Support (Advanced Menu)
Use this menu item to enable/disable the support for Legacy Universal Serial
Bus.
Boot-time Diagnostic Screen (Advanced Menu)
Use this menu item to enable/disable the display on the boot-time Diagnostic
Screen.
Reset Configuration Data (Advanced Menu)
This item is set to No as default. You can change the setting to Yes if you have
installed a new add-on which has reconfigured the system, resulting in such a
serious system conflict that the operating system is unable to boot.
Power On Boot Beep (Advanced Menu)
Use this menu to enable/disable the single beep sound at the end of the POST.
This item is “Disabled” by default.