Phoenix Gold pmn - Manual (Page 35)

Left Side View 1 - 15
1
Introduction
2 * USB 2.0/1.1 Ports
These USB 2.0 compatible ports (USB 2.0 is fully USB 1.1 compliant) are for
low-speed peripherals such as keyboards, mice or scanners, and for high-
speed peripherals such as external HDDs, digital video cameras or high-speed
scanners etc. Devices can be plugged into the computer, and unplugged from
the computer, without the need to turn the system off (if the power rating of
your USB device is 500mA or above, make sure you use the power supply
which comes with the device).
PC Card Slot
The 3.3V/5V slot may be used for a Type-II PC Card (PC Cards were also pre-
viously referred to as PCMCIA) and fully supports Cardbus. Refer to
“PC
Card Slot” on page 2 - 11 for more information.

USB 2.0 Support in Windows XP
Make sure you install Windows XP Service Pack 2 (or are installing a Windows
XP version which includes Service Pack 2) before installing any drivers. Service
Pack 2 includes support for USB 2.0.