Phoenix Gold pmn - Manual (Page 121)

Wireless & PC Camera Modules
Bluetooth Module 7 - 5
7
Bluetooth Module
Before installing the Bluetooth driver, make sure that the optional Bluetooth
module is on. Use the
Ap-Key Button (see “Ap-Key Buttons” on page 2
- 13 ) to toggle power to the Bluetooth module. Make sure you install the
drivers in the order indicated in Table 4 - 1, on page 4 - 6 .
Bluetooth Driver Installation
1.
Make sure the module is powered on, then insert the Bluetooth CD-
ROM into the CD/DVD drive.
2. The program will run automatically.
3. Choose the language you prefer, and click OK.
4. Click Next > Yes > Next.
5. Click Finish to restart the computer.
6. Click OK when the Welcome to Bluetooth screen appears on restart.
7. You can configure the settings by going to the IVT Corporation
BlueSoleil - Main Window control panel (Start > Programs/All
Programs > IVT BlueSoleil), or by clicking the taskbar icon .
View the BlueSoleil User Guides from the Help Menu (or press the F1 key)
in the
IVT Corporation BlueSoleil - Main Window control panel . Click
BlueSoleil User Guides in the Contents tab, and click to select the appropri-
ate User Guide from the panel on the right (see
Figure 7 - 3 on page 7 - 6 ).

Wireless Device
Operation Aboard
Aircraft
The use of any portable
electronic transmission
devices aboard aircraft is
usually prohibited. Make
sure the module(s) are
OFF if you are using the
computer aboard aircraft.
Use the AP-Key button to
toggle power to the Blue-
tooth module, and check
the taskbar icon to see if
the module is powered on
or not (see
Table 7 - 1, on
page 7 - 2 ).