Phoenix Gold pmn - Manual (Page 135)

Troubleshooting
Problems & Possible Solutions 8 - 7
8
Problems & Possible Solutions
Power
Problem Possible Cause - Solution
You turned on the power
but it doesn’t work. Battery missing / incorrectly installed. Check the battery bay, make sure the battery is
present and seated properly (the design of the battery only allows it to go in one way).
Make sure there’s nothing interfering with the battery contacts.
The Battery LED power
indicator
, is blinking
orange.
Low Battery. Plug in the AC power source. If the computer doesn’t start up immediately,
turn it off then on again.
You are losing battery
power too quickly. The system is using too much power. If your OS has a Power Options scheme (see
“Power Schemes” on page 3 - 16 ) check its settings. You may also be using a PC Card
device that is drawing a lot of power.
Actual battery operating
time is shorter than
expected. The battery has not been fully discharged before being recharged. Make sure the battery
is fully discharged and recharge it completely before reusing (see
“Battery Information”
on page 3 - 21 ).
Power Options have been disabled. Go to the Control Panel in Windows and re-enable
the options.
A peripheral device or PC Card is consuming a lot of power. Turn off the unused device to
save power.