Panasonic DMC-GH2 - Manual (Page 42)

VQT3A36
42
Basic
∫ Switching the displayed image while maintaining the Playback Zoom
You can switch the displayed image while maintaining the same zoom magnification and
zoom position for the Playback Zoom.
Switch to picture select operation by pressing
the rear dial during Playback Zoom, and select
pictures with
2/1.
• It will switch between picture select operation and move
zoom position operation every time the rear dial is pressed
during Playback Zoom.
Note
• You can also delete the recording information etc. on the screen during Playback Zoom by
pressing [DISPLAY].
• If you want to save the enlarged picture, use the Cropping function. (P147)
• The Playback Zoom may not operate if pictures have been recorded with other equipment.
• The zoom magnification and the zoom position are canceled when the camera is turned off
(including Sleep Mode).
• The zoom position returns to the center in the following images.
– Images with different aspect ratios
– Images with different numbers of recorded pixels
– Images with a different rotation direction (when [ROTATE DISP.] is set to [ON])
• The Playback Zoom feature is disabled during motion picture playback.
Using the Playback Zoom
Touch the part to enlarge.
1 k >2k>4k>8k>16k
• Picture can be enlarged also by rotating the rear dial right.
• When you change the magnification, the zoom position
indication
A appears for about 1 second.
• The more a picture is enlarged, the more its quality deteriorates.
Move the position to be displayed by dragging the
picture (P15).
• When you move the position to be displayed, the zoom position
indication
A appears for about 1 second.
• Position of the enlarged part can be also moved by pressing the
cursor button.
• Picture will return to the original size (1 k ) by touching [ ].
• Also, when you touch [ ] or rotate the rear dial left, the
magnification becomes lower.
A
DMC-GH2H&GH2K&GH2PP-VQT3A36_eng.book 42 ページ ２０１０年１０月１９日 火曜日 午前１１時３分