Panasonic DMC-GH2 User Manual
Page 60
VQT3A36
60
Basic
•
If it is set to [HOLD] when the camera is set to [
] (P35) or [
] (P80), switching of the playback
screen display (P40) or enlargement by rotating the rear dial is possible during Auto Review.
•
Regardless of the Auto Review setting, pictures will automatically be reviewed when taking
burst pictures with [SH] or [H] set (P76), and recording with Auto Bracket (P78) or with
[ASPECT BRACKET] (P124). (Will not hold) Under these conditions, [AUTO REVIEW] is
disabled.
•
If [HIGHLIGHT] (P129) is set to [ON], white saturated areas appear blinking in black and white
when the Auto Review function is activated.
•
When [AUTO REGISTRATION] in [FACE RECOG.] (P108) is set to [ON], [AUTO REVIEW] can
only be set to [3SEC.] or [5SEC.].
•
When [PC] is selected, the camera is connected via the “USB Mass Storage” communication
system.
•
When [PictBridge(PTP)] is selected, the camera is connected via the “PTP (Picture Transfer
Protocol)” communication system.
•
This will work when the AV cable is connected.
o [AUTO REVIEW]
Set the length of time that the picture is displayed after taking it.
[OFF]/[1SEC.]/[3SEC.]/[5SEC.]
[HOLD]:
The pictures are displayed until shutter button is pressed halfway.
x [USB MODE]
Select the USB communication system after or before connecting
the camera to your PC or your printer with the USB connection
cable (supplied).
y [SELECT ON CONNECTION]:
Select either [PC] or [PictBridge(PTP)] if you connected the
camera to a PC or a printer supporting PictBridge.
{ [PictBridge(PTP)]:
Set after or before connecting to a printer supporting PictBridge.
z [PC]:
Set after or before connecting to a PC.
[TV ASPECT]
Set to match the type of TV.
[W]:
When connecting to a 16:9 screen TV.
[X]:
When connecting to a 4:3 screen TV.
[HDMI MODE]
Set the format for the HDMI output when playing back on the
HDMI compatible high-definition TV connected with this unit using
the HDMI mini cable (optional).
[AUTO]:
The output resolution is automatically set based on the
information from the connected TV.
[1080i]:
The interlace method with 1080 available scan lines is used for output.
[720p]:
The progressive method with 720 available scan lines is used for output.
[480p]:
The progressive method with 480 available scan lines is used for output.
DMC-GH2H&GH2K&GH2PP-VQT3A36_eng.book 60 ページ ２０１０年１０月１９日 火曜日 午前１１時３分