Pioneer DV-353 - Manual (Page 23)

Getting Started 04
23
En
• The button guide at the bottom of every
OSD screen shows you which buttons
you’ll need to use for that screen.
Setting up with the Setup
Navigator
Using the Setup Navigator you can make a
number of other initial settings for this
player. We recommend using the Setup
Navigator, especially if you connected this
player to an AV receiver for playing surround
sound. To answer some of the questions
about digital audio formats you may need to
look at the instructions that came with your
AV receiver.
1 If a disc is playing, press
7 (stop).
Also turn on your TV and make sure that it is
set to the correct video input.
2 Press SETUP.
The on-screen display (OSD) appears.
Audio Settings
Play Mode
Setup Navigator
Disc Navigator
Initial Settings
3 Select ‘Setup Navigator’.
Audio Settings
Play Mode
Setup Navigator
Disc Navigator
Initial Settings
4 Select a DVD language.
Some DVD discs feature on-screen menus,
soundtracks and subtitles in several lan-
guages. Set your preferred language here.
English
French
German
Italian
Spanish
Other Language
DVD Language Language Settings
Audio Out Settings
AV Receiver Func.
Setup Navigator
• Note that the language you choose here
may not be available on all discs.
• If you want to select a language other
than those listed, select Other Lan-
guage. See Selecting languages using
the language code list on
page 53 for
detailed information.
5 Did you connect this player to an
amplifier or AV receiver?
Select
Connected or Not Connected.
Connected
Not Connected
AV Receiver Language Settings
Audio Out Settings
AV Receiver Func.
Setup Navigator
• If you selected Not Connected here,
that completes setup using the Setup
Navigator. Press
ENTER to exit.