Pioneer DV-353 - Manual (Page 35)

Playing Discs 05
35
En
Editing a program list
After creating a program list, you can add,
delete and change steps.
1 Press PLAY MODE and select ‘Pro-
gram’ from the list of functions on the
left.
2 Select ‘Create/Edit’ from the list of
program options.
3 To clear a step, highlight the step
number and press CLEAR.
4 To insert a step in the middle of the
program list, highlight the step where
you want the new step to appear, then
select a title/chapter/folder/track to add.
After pressing
ENTER, the new step is
inserted into the list.
5 To add a step to the end of the
program list, highlight the next free step
then select a title/chapter/folder/track to
add.
• To save your program list and exit the
program edit screen without starting
playback, press
PLAY MODE or SETUP.
• If you want to exit the program edit
screen without saving the changes you
made, press
RETURN.
Other functions available from
the program menu
As well as creating and editing a program
list, you can start program play, cancel
program play, erase the program list, and
memorize a program list from the Playback
Mode menu.
1 Press PLAY MODE and select ‘Pro-
gram’ from the list of functions on the
left.
Create/Edit
Playback Start
Playback Stop
Program Delete
Program Memory ‰ Off
A-B Repeat
Repeat
Random
Program
Search Mode
Play Mode
2 Select a program play function.
• Create/Edit – See above
• Playback Start – Starts playback of a
saved program list
• Playback Stop – Turns off program play,
but does not erase the program list
• Program Delete – Erases the program
list and turns off program play
• Program Memory (DVD only) – Select
On to save the program list for the disc
loaded. (Select
Off to cancel the
program memory for the disc loaded)
• Program lists are saved for the disc
loaded. When you load a disc with a
saved program list, program play is
automatically turned on.
• You can save program lists for up to 24
discs. After that, the oldest one is
replaced with the new one saved.