Pioneer DV-353 - Manual (Page 42)

The Initial Settings Menu 07
42
En
If your AV receiver (or other connected
component) is compatible with high
sampling rates (96 kHz), set this to
96kHz,
otherwise set it to 96kHz > 48kHz (96 kHz
audio is converted to a more compatible 48
kHz). Check the manual that came with the
other component if you’re unsure whether it
is 96 kHz compatible.
MPEG Out
• Default setting: MPEG > PCM
You only need to make this setting if you
connected this system to an AV receiver (or
other component) using one of the digital
outputs.
Digital Audio Out
Video Output
Language
Display
Options
Digital Out
Dolby Digital Out
DTS Out
96 kHz PCM Out
MPEG Out
MPEG
MPEG > PCM
Initial Settings
If your AV receiver (or other connected
component) is compatible with MPEG audio,
set this to
MPEG, otherwise set it to MPEG >
PCM (MPEG audio is converted to more
compatible PCM audio). Check the manual
that came with the other component if you’re
unsure whether it is MPEG audio compat-
ible.
DTS Out
• Default setting: Off
You only need to make this setting if you
connected this system to an AV receiver (or
other component) using one of the digital
outputs.
Digital Audio Out
Video Output
Language
Display
Options
Digital Out
Dolby Digital Out
DTS Out
96 kHz PCM Out
MPEG Out
DTS
Off
Initial Settings
If your AV receiver (or other connected
component) has a built-in DTS decoder, set
this to
DTS, otherwise set to Off. Check the
manual that came with the other component
if you’re unsure whether it is DTS compat-
ible.
• If you set to DTS with a non-DTS
compatible amplifier, noise will be
output when you play a DTS disc.
96kHz PCM Out
• Default setting: 96kHz > 48kHz
You only need to make this setting if you
connected this system to an AV receiver (or
other component) using one of the digital
outputs.
Digital Audio Out
Video Output
Language
Display
Options
Digital Out
Dolby Digital Out
DTS Out
96 kHz PCM Out
MPEG Out
96 kHz > 48kHz
96 kHz
Initial Settings