Proficient Audio Systems 00P3DG090DSEB3 - Manual (Page 12)

DVR User’s Manual
11
3. General System Setup
Before you get started, some general configuration should be setup for the
DVR series unit. The following subsections will introduce function keys on the
front panel and guide you to setup the configuration of the unit.
The regular displayed OSD information and its displayed positions are shown
as following figure. The channel title will be displayed on the top-left side of
the window, either in full screen mode or in multiple channel mode. The
current operating mode, including Call mode, Dome-Control mode, Playback
mode. Freeze mode and Sequence mode, will be displayed on the
bottom-left side of the screen. And the date/ time information will be display
on the bottom-right side.
Ch4
►*1
2005/11/09 PM04:31:22
3.1 Front Panel Introduction
The front panel controls enable user to control the unit and preset the
programmable functions.
3.1.1 LED Definition
The LEDs on the front panel of the DVR series unit are described as follows.
Power LED (Green)
The LED lights up when the correct power is connected
to the unit.
Alarm LED (Red)
The LED lights up when an alarm is triggered.
REC LED (Green)
The LED blinks while the DVR series unit is recording.
Network LED (Green)
The LED lights up when the DVR series unit is
connected to a network and blinks when the data is
being transferred.