Proficient Audio Systems 00P3DG090DSEB3 - Manual (Page 56)

DVR User’s Manual
55
Appendix C: Connect UTP Camera
UTP, short for Unshielded Twisted Pair, is a popular type of cables that is one of the most
common medium in telecommunication industry. Installing the UTP module allows your
DVR to supply power to and transmit images from any four distinctive UTP cameras
through the UTP cables (CAT5). This leads to an economical and fast installation of
surveillance. Some benefits are described as below:
z
Cost Down on Wiring – The cost of wiring decreases for more than 60%
z Save Time & Space – Easy to install and it takes less space than coaxial cable.
z Cost Down on Camera Power Adapter – There is no need to buy adapter for each
UTP Color Box Camera because the power is directly supplied from the DVR unit.
If you are using 4TL model with UTP function, you are provided the option to connect UTP
camera to the DVR. The picture below shows the simple connection.
Follow the steps below to complete the UTP camera installation.
Step 1 :
Connect the DVR and the UTP Camera via the UTP cable (CAT5).
NOTE:
The DVR should be powered OFF before the installation of the UTP
Camera.
Step 2
:
On the back panel of the DVR, switch the video source to ON (UTP). For instance, if you
will be installing a UTP Camera to channel 1, switch the video source 1 to ON. The correct
setting is shown as below.
Video Source Selection