Proficient Audio Systems 00P3DG090DSEB3 - Manual (Page 13)

DVR User’s Manual
12
3.1.2 Function Keys
This section describes the functional keys, which are for normal operation, on
the front panel of the DVR series unit.
Refer to the Setup Guide for the graphical illustration of functional keys.
CHANNEL
• In both Live and Playback modes, press the CHANNEL key to view the
corresponding video in full screen. The number of the CHANNEL keys
corresponds to the number of cameras supported by the unit.
• In dome control mode, the key “1” is used to access the Set/Go preset
menu; the key “2” is used to hide or display the dome setting parameters.
DOME
Press the key to enter dome control mode. Please refer to Section Dome
Control for detailed controlling operation.
MODE
Press repeatedly to select for wanted main monitor display format. There are
four available view modes: full screen, 4-window (2×2), 9-window (3x3), and
16-window (4x4). Refer to Section View Modes for detailed information.
SEQ (Sequence)
Press to start automatic sequencing of the video coming from the installed
cameras.
MENU
Press this key to call the OSD setup menu.
ESC
• Press to cancel or exit from certain mode or OSD setup menu without
changing the settings made previously.
• This key allows you to enable the key lock function.
• If the password protection has been enabled, press ESC for five seconds
to lock up the function of certain keys on the front panel, including PLAY,
MENU, SEARCH, CALL and DOME. Once you lock up the function of
these keys, you have to enter the correct password before accessing the
functions of these keys. The unlocking time will last for 5 minutes.
Afterwards these keys will be locked again.