Proficient Audio Systems 00P3DG090DSEB3 User Manual
Page 58
DVR User’s Manual
57
Appendix D: Connect Analog Camera via UTP
Converter
NOTE
: The UTP Converter can provide power up to 5.5W. If the power
consumption of your camera is higher than 5.5W, do NOT connect it to the
UTP Converter.
Introduction:
The UTP converter is made especially for users who want to
build a connection between an UTP DVR and a traditional
analog camera, which allows the transmission of power and
video signal through one CAT5 cable.
The UTP converter has two cables at one end—one cable
for connecting with the camera’s BNC video connector; and
the other for connecting with power jack of the camera.
A RJ-45 connector is positioned at the other end of the
converter. Connect the UTP converter and the UTP DVR
using a CAT5 cable.
Installation:
To build up an UTP connection using the UTP converter,
connect the BNC and power connectors to camera
respectively, and connect with the DVR using an Ethernet
CAT5 cable.