Additional information 14 – Pioneer DVR-530H-S User Manual

Page 105

Advertising
background image

Additional information

14

105

En

If the unit does not operate normally due to external effects such as static electricity, disconnect the power plug from the
outlet and insert again to return to normal operating conditions.

After briefly unplugging or after a
power failure the front panel dis-
play shows ‘--:--’

• A backup battery inside the recorder keeps the clock and other settings from
being reset when there is no power to the recorder. This battery should last
approximately five years from factory shipping.
Reset the clock and other recorder settings to use the recorder again. To have the
battery replaced, contact your dealer or a Pioneer Service Center.

Front panel display shows ‘LOCK’
when a button is pressed

• The Child Lock is on; turn off in order to use the recorder (page 44).

Can’t use One Touch Copy (HDD to
DVD)

• Make sure that there is a recordable DVD loaded with some free space for
recording and fewer than 99 titles already on the disc. Also make sure that for a
Video mode disc, the disc isn’t finalized.
• If the title currently playing contains material that is copy-once protected, One
Touch Copy will not work.
• If the currently playing HDD content was recorded in XP+ mode, the One Touch
Copy feature can’t be used.
• One Touch Copy doesn’t work if the recorder is already recording to DVD.

Can’t use One Touch Copy (DVD to
HDD)

• Make sure that there is space available on the HDD and that there are fewer than
999 titles on the HDD.
• One Touch Copy doesn’t work if the recorder is already recording to the HDD.

The picture freezes and the front
panel and remote control buttons
stop working

• Press

STOP

then try restarting playback.

• Press the front panel

STANDBY/ON

button to switch the power off, then

switch back on and restart playback. If the power fails to switch off, press and hold

STANDBY/ON

for 10 seconds until the power switches off.

The device connected to the USB
port isn’t recognized

• Check that the device is compatible with this recorder (page 19).
• Use a USB cable shorter than five meters long.
• Check that the cable is properly connected at both ends.
• Try switching this recorder into standby then back on.
• Try using the

Restart USB Device

option (page 97).

Cannot import picture files from a
connected USB camera

• Check that the device is compatible with this recorder (page 19).
• Check that the camera is switched on.
• If several USB devices (camera, USB memory, card reader, etc.) are connected
together, it’s possible that only the first device connected to this recorder will be
recognized.

Can’t print from the USB printer

• Check that the device is compatible with this recorder (page 19).
• Connect the printer to the type B USB port on the rear of the recorder (page 12,
page 19).
• Make sure that the printer is switched on.
• Try the

Confirm Printer

option to check that the recorder recognizes the printer

(page 97).
• Depending on the printer, the index print option may not work.

Problem

Remedy

DVR530HS_RDR.book 105 ページ 2005年5月26日 木曜日 午後3時19分

Advertising