Pioneer DVR-530H-S - Manual (Page 92)

The Initial Setup menu 13
92
En
Chapter 13
The Initial Setup menu
Using the Initial Setup menu
The Initial Setup menu is where you can set various recorder options for sound, picture, language and so on.
Some settings can only be changed when the recorder is stopped. During playback and recording these settings are
grayed out in the Initial Setup menu.
Except for the Setup Navigator, menu screens are exited automatically after 20 minutes of inactivity.
• Press HOME MENU and select ‘Initial Setup’.
In the table below, the default option is marked with a •.
Tip
• Some of the Initial Setup menu screens shown in this section vary slightly depending on the country or region of
purchase.
Setting Options Explanation
Basic Settings
Clock Setting Auto Set the channel that broadcasts a clock signal and the clock will be set
automatically.
Manual • If there is no channel that broadcasts a clock signal in your area, you
can set the time and date manually.
Display Set preferences for time and date display format.
The clock must be set in order to use timer recording.
Input Line System 525 System • Use for NTSC or PAL-M recording.
625 System Use for standard PAL-N recording.
See also About the input line system on page 98 for more information on this setting.
Help Setting On • Switches on the automatic Help screens for GUI displays.
Off Switches off the automatic Help screens for GUI displays. (Press HELP
on the remote to manually display the Help screen.)
Setup Navigator Start Select to start the Setup Navigator. See also Switching on and setting
up on page 24 .
Tuner Settings
Auto Channel Setting Antenna • Select if you receive channels from an antenna. It takes a few
moments for the auto tuning to complete.
Cable Select if you receive channels via cable. It takes a few moments for the
auto tuning to complete.
DVR530HS_RDR.book 92 ページ ２００５年５月２６日 木曜日 午後３時１９分