Pioneer DVR-530H-S - Manual (Page 28)

Getting started 04
28
En
Using the built-in TV tuner
Changing TV channels
There are three different ways to select TV channels. Note
that you can’t change the TV channel during playback,
recording or during recording standby.
• CH +/– buttons on the remote
• Number buttons on the remote – For example, to
select channel 4, press 4 then ENTER ; for channel 34,
press 3 , 4 , ENTER . 1
• +/– buttons on the front panel
Changing audio channels
Some TV programs are broadcast with both a main and a
Second Audio Program (SAP). You can change the TV
audio using the
AUDIO button.
• Press AUDIO to change the audio.
The current audio channel is displayed on-screen.
• If SAP is selected, but there is no SAP channel being
broadcast, you will still hear the main audio channel.
• If the sound is poor quality when set to Stereo , you
can often improve it by changing to Mono .
Tip
• When recording to the HDD with HDD Recording
Format set to Video Mode On, to DVD in Video mode,
or on the
LPCM setting, only one channel of a dual
mono broadcast is recorded. In this case, decide
which language you want to record before recording
by setting the Dual Mono Recording setting (see
Dual
Mono Recording on page 93).
Note
1. Antenna channels are numbered 2–69; cable channels are numbered 1–125.
HDD DVD
ENTER
CH
AUDIO
Mono SAP
Stereo
DVR530HS_RDR.book 28 ページ ２００５年５月２６日 木曜日 午後３時１９分