Panasonic FP2 - Manual (Page 46)

FP2−CCU Specifications
6 − 4
6.2 Table of MEWTOCOL Command
6.2 Table of MEWTOCOL Command
The following is a table of MEWTOCOL commands that can be used with the FP2
Computer Communication Unit.
6.2.1 MEWTOCOL−COM Commands
RCS Read single point of contact information
WCS Write single point of contact information
RCP Read plural points of contact information
WCP Write plural points of contact information
RCC Read word unit of contact information
WCC Write word unit of contact information
SC Preset word unit in contact area
RD Read data area
WD Write data area
SD Preset of data area
RS Read timer and counter set value area
WS Write timer and counter set value area
RK Read timer and counter elapsed value area
WK Write timer and counter elapsed value area
MC Registration and reset of monitor contact
MD Registration and reset of monitor data
MG Monitor execution
RR Read system register
WR Write system register
RT Read PLC status
RM Remote control (RUN/PROGRAM mode switching)
AB Transmission abort command
LC Hierarchy control