Palm 5240 - Manual (Page 28)

-23-
Headset Operation (with Feature Control Switch)
IMPORTANT NOTE: Mitel Networks Headsets with Feature Control Switch
must be installed in the dedicated headset jack on the back of the phone.
Installation will disable your handset microphone. Disconnecting the headset
at the jack or at the quick-disconnect plug restores handset operation. If
handset operation is required for an extended period of time, you should
press the Headset feature key to return the telephone to handset mode.
To enable Headset Operation:
z
Press the Headset key.
To answer a call:
z
Press line key with the flashing icon.
-
OR
-
Quickly press and release the headset's feature control switch.
To mute the headset microphone:
z
Press and hold the headset's feature control switch.
To hang up:
z
Press Hang-up command key.
-
OR -
Quickly press and release the headset's feature control switch.
To disable Headset Operation:
z
Press the Headset key.
Music
To turn Music on and off when the phone is idle:
Do one of the following:
z
To turn the music on, press the Music On command key.
z
To turn the music off, press the Music Off command key.