Pioneer Video Card PDA-5002 - Manual (Page 11)

11
En
Installation and Connections
English
Installation and Connections
About DTV Set Top Box Connection
To ensure proper connection, please carefully read the
instruction manual supplied with the DTV set top box.
The set top box output signals that this display is
compatible with are as follows.
Video
signal type Video
signal format
Video signal
INPUT1
Jacks where connection is possible
INPUT4 INPUT3 INPUT2
HDTV
SDTV
1125i (1080i)
1125p (1080p)
750p (720p)
525i (480i)
625i (575i)
525p (480p)
625p (575p)
Component
RGB
Composite
S Video
Component
RGB
Component
RGB
Personal computer
Connection to INPUT5
A computer equipped with DVI output (digital RGB signal)
can be connected to the video card’s DVI connector.
INPUT5
DIGITAL RGB
Following completing connections, on-screen setup is
necessary. See page 14 for details.
Notes
¶ Use a DVI-D 24-pin (digital only) cable for the connection.
¶ This unit does not support the display of copyguard-
protected video signals.
NOTICE
¶ INPUT 5 supports Microsoft “Plug & Play” (VESA DDC 2B)
components. See Supplement 3 (page 33) when making
connections to INPUT 5.
¶ See Supplement 2 (page 32) for information regarding signals
and display formats supported by INPUT 5.