Pioneer Video Card PDA-5002 - Manual (Page 21)

21
En
Display Panel Adjustments
English
Display Panel Adjustments
Adjusting the Picture Quality
1 Press MENU to display the menu screen.
R S E T E
SELECT ENTER EXIT SET MENU
PICTURE SET UP OPTION
: 0
: 0
: 0
: 0
C O N T R A S T : 0
B R
C L OR
I GH T.
:
:
: O
T N T I
S A RP H
MAIN MENU INPUT4
When viewing an image from a personal computer
from INPUT1, INPUT2 or INPUT5, the following
screen is displayed.
MAIN MENU INPUT1
SELECT ENTER EXIT SET MENU
PICTURE SCREEN SET UP OPTION
: 0
: 6 +
+
+ 0
: 6 0
: 6 0
: 0
: 0
C O N T R A S T : 0
B R
R L E V E L
I GH T .
.
G L E V E L .
B L E V E L .
H E NH AN CE .
V E NH AN CE .
R S E T E
2
Press 5/∞ to select the adjustment item, then
press SET.
SELECT ENTER EXIT SET MENU
PICTURE SET UP OPTION
C O N T R A S T : 0
B R I GH T .
: 0 C O LOR
: 0 T I NT
: 0 S H AR P
R E S E T
: 0
MAIN MENU INPUT4
3
Press
2/3 to adjust the picture quality as desired.
ADJUST SET EXIT SET MENU
: 0 B R I G H T .
4 Press SET.
Pressing SET writes the value into the memory and
returns the display to the step 2 screen.
5 When the setup is finished, press MENU to exit
the menu screen.
Note
Make these adjustments for each input (INPUT1 to INPUT5) and
signals.
PICTURE mode adjustment items
Below are brief descriptions of the options that can be set
in the PICTURE mode.
CONTRAST ············· Adjust according to the surrounding
brightness so that the picture can be
seen clearly.
BRIGHT. ·················· Adjust so that the dark parts of the
picture can be seen clearly.
COLOR ···················· Adjust to the desired depth. (Setting
to a slightly deep color will create a
natural looking picture.)
TINT ························· Adjust so that flesh tones look
normal.
SHARP ···················· Normally set to the center position.
To create a softer picture, set to the
left of center. To create a sharper
picture, set to the right of center.
To reset PICTURE mode settings to the default
If settings have been adjusted excessively or the picture
on the screen no longer appears natural, it may prove
more beneficial to reset the PICTURE mode to default
settings instead of trying to make adjustments under
already adjusted conditions.
1 In step 2 in the previous procedure, press 5/∞ to
select RESET, then press SET.
SELECT SET EXIT SET MENU
P I C T U RE R E S E
Y E S
T ?
N O
2
Press
2/3 to select YES, and press SET.
All PICTURE mode settings are returned to the factory
set default.