Pioneer Video Card PDA-5002 - Manual (Page 12)

12
En
English
Installation and Connections
INPUT1
INPUT2
INPUT5
INPUT3
INPUT4
Audio input jacks Sound output
Stereo mini jack
(L/R)
Pin jacks (L/R)
Pin jacks (L/R)
Sound of the selected video
input is output from the
• SPEAKER terminals
• Stereo mini jacks (L/R).
Installation and Connections
Audio Connections
Before making connections, be sure to check that the
audio component’s power and the display’s main power is
off.
Connect an audio component to the audio input
jack of the plasma display with installed video
card.
When the video card is installed, the plasma display
provides three audio input jacks and one audio output
jack. Consult the following chart to choose the proper
audio input for each video input.
Video
input
Of the audio sources connected to INPUT1, INPUT2 and
INPUT5, one can be used to connect a stereo mini-jack (L/
R) type plug.
Sound is output from both the AUDIO OUTPUT jack
(stereo mini jack (L/R)) and the SPEAKER terminals
according to the video input selection.
Audio connection for component connected to
INPUT1, INPUT2 or INPUT5
VD
Ô 75 2.2
Ω k Ω
INPUT
(INPUT1/2)
OUTPUT
AUDIO
Audio connection for component connected to
INPUT3
Audio input to the AUDIO INPUT3 jacks (pin jacks (L/R)) is
possible for a component connected to INPUT3.
Sound is output from both the AUDIO OUTPUT jack
(stereo mini jack (L/R)) and the SPEAKER terminals
according to the video input selection.
Audio connection for component connected to
INPUT4
Audio input to the AUDIO INPUT4 jacks (pin jacks (L/R)) is
possible for a component connected to INPUT4.
Sound is output from both the AUDIO OUTPUT jack
(stereo mini jack (L/R)) and the SPEAKER terminals
according to the video input selection.
AUDIO INPUT4 VIDEO OUTPUT
R L
AUDIO INPUT3 S-VIDEO
R L