Panasonic SC-BTX70 EN - Manual (Page 37)

37
RQT9464
*1 This function has no effect when S.SURROUND is selected during AUX (TV) playback.
*2 In this unit, a P4HD (> 53) video processor is used to provide video of optimal resolution to the connected TV.
“TV/Device Connection”
TV Aspect
Set to match the type of television connected.
When connected to a 16:9 widescreen television:
≥16:9:
Video recorded for 4:3 aspect screen is displayed as a
4:3 ratio image in the centre of the screen.
When connected to a 4:3 aspect television:
≥4:3:
Video recorded for a widescreen is played as Pan &
Scan (unless prohibited by the producer of the disc).
When playing BD-Video, video is output as “4:3
Letterbox”.
≥4:3 Letterbox: Video recorded for a widescreen is played in the
letterbox style.
Time Delay* 1
When connected with a Plasma display, adjust if you
notice the audio is out of sync with the video.
≥Auto ≥0ms ≥20ms≥40ms≥60ms≥80ms≥100ms ≥120ms ≥140ms
When using VIERA Link “HDAVI Control” with “HDAVI Control 3” (or later)
compatible TV (> 26), select “Auto”. Audio and video will automatically
be set in sync.
–This works only when “BD/DVD”, “SD”, “USB”, “AUX”, “D-IN 1” (DIGITAL
IN 1) or “D-IN 2” (DIGITAL IN 2) is selected as the source. (> 27)
HDMI Connection
≥Press [OK] to show the following settings.
HDMI Video Format* 2
The items supported by the connected devices are
indicated on the screen as “¢”. When any item
without “¢” is selected, the images may be
distorted.
≥Automatic: Automatically selects the output resolution best suited
to the connected television (1080p, 1080i, 720p or
576p/480p).
≥576p/480p ≥720p
≥1080i ≥1080p
–When outputting 1080p signal, we recommend using High Speed HDMI
Cables that have the HDMI logo (as shown on the cover) and are less
than 5.0 meters to prevent video distortion etc.
–To enjoy high definition video up-converted to 1080p, you need to
connect the unit directly to 1080p compatible HDTV (High Definition
Television). If this unit is connected to an HDTV through other
equipment, it must also be 1080p compatible.
24p Output [BD-V] [DVD-V]
When this unit is connected to a TV supporting
1080/24p output via an HDMI cable, this unit
displays each frame at 1/24 second intervals – the
same interval originally shot with the film camera.
≥When playing DVD-Video, set to “On” and then
set “24p” in “Picture” (> 34) to “On”.
≥On: Images in 24p are output in 24p as they are.
However,
–when video is being output at 24 frames, images from
any other terminal than the HDMI AV OUT terminal may
not be output properly.
– [BD-V] : when images other than 24p are played,
images are output at 60p.
≥Off
HDMI Output Range
Effective when connected to a device that only
supports RGB output. ≥Standard: The video is output as it is.
≥Enhanced: When the black and white contrast of a video is low, the
signal is enhanced to reproduce clear video.
HDMI Audio Output
This setting selects whether or not to output audio
from HDMI. ≥On: To output audio through the TV’s speakers or other
devices.
≥Off: To output audio through system speakers. (The audio is
output using the settings of the main unit.)
VIERA Link
Set to use “HDAVI Control” function when
connected with an HDMI cable to a device that
supports “HDAVI Control”.
≥On:
≥Off: Select when you do not want to use “HDAVI Control”.
Power Off Link
Select the desired power off link setting of this unit
for VIERA Link operation (> 27). (This works
depending on the settings of the connected VIERA
Link “HDAVI Control” compatible equipment.)
≥Video/Audio: When the TV is turned off, this unit will turn off
automatically.
≥Video: When the TV is turned off, this unit will turn off except
during the following conditions:
–audio playback ( [CD] [MP3] )
–iPod mode
–radio mode
–“AUX” or “D-IN1” (DIGITAL IN 1) mode (non-selected
TV audio setting for VIERA Link)
–“D-IN2” (DIGITAL IN 2) mode (non-selected TV audio
setting for CABLE/SAT)
TV System
Change the setting to match the equipment you are
connecting with.
≥If picture output is not smooth, change the setting.
≥When NTSC contents are played, they are
outputted in the signal format specified in the
“NTSC Contents Output”, irrespective of the
settings here.
≥NTSC: Select when connecting to a NTSC television.
≥PAL: Select when connecting to a PAL or multi-system
television.
Advanced operations
SC-BTX70EGEB-RQT9464-B.book 37 ページ ２００９年４月９日 木曜日 午後２時５３分