Panasonic SC-BTX70 EN - Manual (Page 9)

9
RQT9464
TV connections
≥To output the TV audio, connect the audio cable or the optical digital audio cable.
When the optical digital audio cable is connected, this unit can decode Dolby Digital audio from the TV.
≥When connecting with the video cable, set “High Clarity Sound” in the on-screen menu to “Off” (> 34).
(Otherwise, the video will not be output.)
Optional connections
≥For those who want to enjoy higher picture quality and have a TV equipped with an HDMI terminal.
–Do not disconnect the video cable even if the HDMI cable is connected. Some features may not be
displayed.
≥For those who have a Set Top Box (Satellite receiver, Cable box, etc.) or video cassette recorder (> 10)
When connecting with an HDMI cable
≥If there is more than one HDMI terminal, refer to the operating instructions for the TV to determine terminal to connect
to.
≥Non-HDMI-compliant cables cannot be utilized.
≥Please use High Speed HDMI Cables that have the HDMI logo (as shown on the cover). It is recommended
that you use Panasonic’s HDMI cable.
Recommended part number:
RP-CDHG10 (1.0 m), RP-CDHG15 (1.5 m), RP-CDHG20 (2.0 m), RP-CDHG30 (3.0 m), RP-CDHG50 (5.0 m), etc.
≥This unit incorporates HDMI TM (v.1.3a with Deep Colour, x.v.Colour TM , High Bit rate Audio) technology. (> 52, 53)
≥When outputting 1080p signal (> 37, “HDMI Video Format”), please use HDMI cables 5.0 meters or less.
NECESSARY SETTINGS for HDMI connections
“HDMI Audio Output” : “Off” (> 37)
–With this connection, you can use VIERA Link “HDAVI Control” (> 26).
To enjoy TV audio from this home theatre system’s speakers
*1 You can enjoy the audio from your TV through this home theatre system’s speakers by connecting to the “AUX”
terminal or “OPTICAL 1(TV)” terminal. (> 25)
*2 This is the preferred connection for optimum sound and surround sound.
This unit can decode the surround signals received from your TV. Refer to the operating instructions for the TV for the
settings necessary to output its audio from the digital audio output to your home theatre system. Only Dolby Digital and
PCM can be played with this connection.
–After making this connection, make settings to suit the type of audio from your digital equipment (> 25).
1 Video cable
OPTICAL
OUT
L
R
AUDIO OUT
VIDEO IN
AV IN
HDMI AV OUT
VIDEO OUT
OPTICAL 1(TV)
HDMI AV OUT
VIDEO OUT
OPTICAL 1(TV)
AUX Audio cable* 1
(not included)
Main unit
HDMI cable (not included)
TV
Optical digital audio cable* 1, 2
(not included)
Video cable (included)
1
NOTE
TIPS
Getting s
tar
te
d
SC-BTX70EGEB-RQT9464-B.book 9 ページ ２００９年４月９日 木曜日 午後２時５３分