Letterbox, 9 wide, Centre cut – Panasonic TU-HDT206A User Manual

Page 15

Advertising
background image

Operating Instructions

TU-HDT206A


15

HD Video Output Format


The initial installation of the digital receiver
defaults the video output format to 1280x720p
for LCD and PDP TV’s and 720x576p for CRT
TV’s. LCD and Plasma TV’s can be changed to
720x576p, 1280x720p and 1920x1080i video
formats. CRT TV selection is restricted to
720x576p and 1920x1080i video formats.

The selection is made by moving the up/down
cursors to the desired format and confirming the
selection by the OK button.

The remote control “V Format” button also can be used to change the video output
format, in the sequence 576p, 720p, 1080i and back to 576p. The format type is
shown briefly on the front panel display of the digital receiver and in the top right of
the picture.

HDMI Format

The digital video via the HDMI interface is available as RGB 4:4:4 , YCbCr 4:4:4 , and
YCbCr 4:2:2. The digital receiver automatically selects the format that best suits your
display. This menu item is only available when an HDMI connection is made between
the digital receiver and display.


Teletext Contrast

The contrast of teletext pages can be adjusted to suit your display by selecting from
the 3 available settings.


Display Time Out

This feature allows you to select the length of time the Information Banner is
displayed on the picture. The time selection is 3 seconds, 6 seconds, 9 seconds, and
12 seconds.


SD Picture Format

This setting changes the video format of the CVBS and S-
Video output only. It is only operational when there is no HD
format connection made to the display.


If your display has a 4:3 aspect ratio, and the transmission of a
program happens to be 16:9, the Letterbox mode will give you
a complete picture, but black areas will appear at the top and
bottom.


Alternatively you can choose the Centre Cut mode to play the
program in a full-screen format. However picture information on
the left and right sides will be cut off.


If your display has a widescreen aspect ratio, then set the
mode to Widescreen 16:9. If a program happens to be in
4:3, black areas will appear at the left and right of the screen
in order to present the picture in a correct aspect ratio.

Panasonic

16:9 Wide

Letterbox

Centre Cut

Advertising