Panasonic KX-FLB753HK - Manual (Page 32)

Sending Faxes
- 32 -
Fax Sending a fax manually
Using the auto document
feeder
Confirm that there are no documents on the
scanner glass.
1
Adjust the width of the document guides to
the size of the document.
2
Insert the document (up to 15 pages) FACE
DOWN into the feeder until the unit grasps
the document and a single beep is heard.
STANDARD
3
If necessary, press
{{{{RESOLUTION}}}}
repeatedly to select the desired setting.
4
Press
{{{{MONITOR}}}} or lift the handset.
TEL=
PRESS STATION OR
b
TEL=
PRESS NAVI.[
( )]
5
Dial the fax number.
Example:
TEL=5678901
6
Start sending.
When a fax tone is heard:
Press
{{{{FAX START}}}}, and replace the
handset if you are using it.
When the other party answers your call:
Lift the handset and ask them to press their
start button. When the fax tone is heard,
press
{{{{FAX START}}}} and replace the
handset.
CONNECTING.....
STANDARD
Note:
L Do not open the document cover when
sending a fax with the auto document feeder.
To select the resolution
Select the desired resolution according to the
type of document.
–
“STANDARD”: For printed or typewritten
originals with normal-sized characters.
– “FINE”: For originals with small printing.
– “SUPER FINE”: For originals with very small
printing. This setting only works with other
compatible fax machines.
– “PHOTO”: For originals containing
photographs, shaded drawings, etc.
L Using the “FINE”, “SUPER FINE” or
“PHOTO” setting will increase transmission
time.
L If the resolution setting is changed during
feeding, it will be effective from the next
sheet.
To redial the last number
Press
{{{{REDIAL/PAUSE}}}}, then press
{{{{FAX START}}}}.
L If the line is busy, the unit will automatically
redial the number up to 5 times.
L During redial, the following will be displayed.
WAITING REDIAL
FACEDOWN
Document guides
{FAX START} {RESOLUTION}
{MONITOR}
{SCAN} {REDIAL/PAUSE}