Panasonic KX-FLB753HK - Manual (Page 68)

Error Messages
- 68 -
Help Reports
If your unit cannot send a fax, check the following:
–
The number you dialled is correct.
– The other party’s machine is a facsimile.
If the problem remains, correct it by following the communication message printed on the sending and
journal reports (page 33).
COMMUNICATION ERROR
(CODE: 40-42, 46-72, FF)
L
A transmission or reception error occurred.
Try again or check with the other party.
COMMUNICATION ERROR
(CODE: 43, 44)
L
A line problem occurred. Connect the
telephone line cord to a different jack and try
again.
L
An overseas transmission error occurred. Try
using the overseas mode of feature #23
(page 65).
DOCUMENT JAMMED
L
The document is jammed. Remove the
jammed document (page 80).
ERROR-NOT YOUR UNIT
(CODE: 54, 59, 70)
L
A transmission or reception error occurred
because of a problem with the other party’s
fax machine. Check with the other party.
MEMORY FULL
L
The document was not received as a result of
the memory being full.
NO DOCUMENT
L
The document was not fed into the unit
properly. Reinsert the document and try
again.
OTHER FAX NOT RESPONDING
L
The other party’s fax machine is busy or has
run out of recording paper. Try again.
L
The document was not fed properly. Reinsert
the document and try again.
L
The other party’s fax machine rings too many
times. Send the fax manually (page 32).
L
The other party’s machine is not a facsimile.
Check with the other party.
L
The number you dialled is not in service.
PRESSED THE STOP KEY
L {
STOP
}
was pressed and fax
communication was cancelled.
THE COVER WAS OPENED
L
The printer cover was opened. Close it and
try again.
OK
L
Fax communication was successful.