Panasonic KX-FLB753HK - Manual (Page 69)

Error Messages
- 69 -
Display
If the unit detects a problem, one or more of the following messages will appear on the display.
CALL SERVICE
L
There is something wrong with the unit.
Contact our service personnel.
CARRIAGE ERROR
b
RELEASE
SHIPPING LOCK
L
The shipping lock is locked. Unlock the
shipping lock (page 12). If the display
messages still remain after unlocking, there
is something wrong with the carriage sensor.
Contact our service personnel.
CHANGE DRUM
L
There is something wrong with the drum unit.
Replace the drum unit and the toner cartridge
(page 75).
CHECK ADF CABLE
L
The ADF cable is not connected correctly.
Check the connection (page 11).
CHECK DOCUMENT
L
The document was not fed into the unit
properly. Reinsert the document. If
misfeeding occurs frequently, clean the
document feeder rollers (page 83) and try
again.
CHECK DRUM
L
The drum unit is not inserted properly.
Reinsert it correctly (page 13).
CHECK MEMORY
L
The memory (telephone numbers,
parameters, etc.) has been erased. Re-
program.
CLOSE ADF COVER
L
The ADF cover is open. Close it.
COVER OPEN
L
The printer cover is open. Close it.
DATA IN MEMORY
L
You tried to change the cable type setting
(feature #15 on page 64), while the fax
machine has a document in memory. Finish
sending faxes, print out the document in
memory (page 44) or cancel the delayed
transmission (feature #25 on page 66) and
try again.
DIRECTORY FULL
L
There is no space to store new entries in
navigator directory. Erase unnecessary
entries (page 26).
FAILED PICK UP
L
Recording paper was not fed into the unit
properly. Reinsert the recording paper (page
79).
FAX IN MEMORY
L
The unit has a document in memory. See the
other displayed message instructions to print
out the document.
FAX MEMORY FULL
L
The memory is full of received documents
due to a lack of recording paper or a
recording paper jam. Install paper (page 16)
or clear the jammed paper (page 78).
L
When performing memory transmission, the
document being stored exceeds the memory
capacity of the unit. Transmit the entire
document manually.