Pioneer AVH-P6800DVD - Manual (Page 101)

Introduction of setup
adjustments
1
1 Setup menu display
Shows the setup function names.
1 Touch AUDIO MENU to display MENU.
MENU appears on the display.
# You can also display MENU by clicking the
joystick on the remote control.
2 Touch SETUP to display the setup func-
tion names.
The setup function names are displayed and
operable ones are highlighted.
# To return to the previous display, touch BACK.
# To return to the display of each source, touch
ESC.
Note
If you do not operate the setup function within
about 30 seconds, the display is automatically re-
turned to the source display.
Setting the AV input
You can connect an AV component to this unit
and display videos either on
AV source or EXT
source.
Switch the AV input setting depending on the
connected AV components.
! Select VIDEO to watch video of a con-
nected component as AV source.
! Select EXT-V to watch video of a connected
video unit as EXT source.
% Touch AV input on the setup menu to
select the AV input setting.
Touch
AV input until the desired setting is se-
lected.
! OFF – No video component is connected
! VIDEO – External video component (such
as portable video player)
! EXT-V – External video unit (such as Pio-
neer products available in the future)
# EXT-V can be selected only when external
video unit is connected to this unit.
Setting for rear view
camera (back up camera)
CAUTION
Pioneer recommends the use of a camera
which outputs mirror reversed images, other-
wise screen image may appear reversed.
This unit features a function that automatically
switches to the rear view camera video (
BACK
UP CAMERA IN jack) when a rear view cam-
era is installed on your vehicle. When the gear
shift is in REVERSE (R) position, the video
automatically switches to a rear view camera
video. (For more details, consult your dealer.)
! After you set up the rear view camera set-
ting, move the gear shift in REVERSE (R)
and confirm if a rear view camera video
can be shown on the display.
! If the display should be switched to a rear
view camera video by error while you are
driving forward, change the rear view cam-
era setting.
! To end watching a rear view camera video
and return to the source display, press
V.ADJ.
Setup
En
101
Section
21
Setup