Pioneer AVH-P6800DVD - Manual (Page 26)

Listening to the radio
1 2 6 5 7 4 3
8
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
1 Source name
Shows the selected source name.
2 Source icon
Shows which source has been selected.
3 Band indicator
Shows which band the radio is tuned to, AM
or FM.
4 Preset number indicator
Shows which preset has been selected.
5 STEREO indicator
Shows when the selected frequency is
being broadcast in stereo.
6 LOCAL indicator
Shows when local seek tuning is on.
7 Frequency indicator
Shows the frequency to which the tuner is
tuned.
8 Preset list display
Shows the preset list.
1 Touch the source icon and then touch
TUNER to select the tuner.
2 Touch the screen to display the touch
panel keys.
3 Touch BAND to select a band.
Touch BAND repeatedly until the desired band
is displayed, FM1, FM2, FM3 for FM or AM.
4 To select a preset channel, touch a pre-
set channel on the list or touch a or b
(P.CH).
The preset channel you selected is tuned in.
# Touching LIST switches between the preset
channel list display and the a/b (P.CH) display.
Either way, the channels that can be selected are
the same.
5 To perform manual tuning, briefly
touch c or d.
The frequencies move up or down step by
step.
# You can also perform manual tuning by mov-
ing the joystick on the remote control left or right.
6 To perform seek tuning, keep touching
c or d for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
# You can cancel seek tuning by briefly touching
either c or d.
# If you keep touching c or d you can skip sta-
tions. Seek tuning starts as soon as you release
the key.
# You can also perform seek tuning by holding
the joystick on the remote control left or right.
Note
If you do not use the touch panel keys within 30
seconds, they will be hidden automatically.
Tuner
En
26
Section
06