Pioneer AVH-P6800DVD - Manual (Page 103)

Introduction of DVD setup
adjustments
1
You can use this menu to change audio, subti-
tle, parental lock and other DVD settings.
1 DVD setup menu display
Shows the DVD setup menu names.
1 While playing a DVD disc, touch g.
Playback of the disc is stopped. SETUP will be
displayed instead of MENU on the DVD menu.
2 Touch SETUP.
The DVD setup menu is displayed.
3 Touch LANGUAGE to display the DVD
language menu. Touch VISUAL to display
the DVD visual menu.
The DVD function names categorized under
the selected menu are displayed.
# To go to the next group of function names,
touch
NEXT.
# To return to the previous group of function
names, touch
PREV.
# To return to the previous display, touch BACK.
# To return to the playback display, touch ESC.
Note
If you do not operate the DVD setup function
within about 30 seconds, the display is automati-
cally returned to the playback display.
Setting the subtitle language
You can set a desired subtitle language. If the
selected subtitle language is recorded on the
DVD, subtitles are displayed in that language.
1 Touch SUB TITLE LANGUAGE on the
DVD language menu.
Subtitle language menu is displayed and the
currently selected language is highlighted.
# To switch to the second language select
menu, touch
NEXT.
# To return to the first language select menu,
touch
PREV.
2 Touch the desired language.
A subtitle language is set.
# If you have selected OTHERS, refer to When
you select
OTHERS on this page.
Notes
! If the selected language is not recorded on
the disc, the language specified on the disc is
displayed.
! You can also switch the subtitle language by
touching SUB TITLE during playback. (Refer
to Changing the subtitle language during play-
back (Multi-subtitle) on page 33.)
! Even if you use SUB TITLE during playback to
switch the subtitle language, this does not af-
fect the settings here.
When you select OTHERS
When you select OTHERS, a language code
input display is shown. Refer to Language code
chart for DVD on page 126 to input the four-
digit code of the desired language.
1 Touch 0 —9 to input the language code.
# To cancel the inputted numbers, touch C.
2 While the inputted number is dis-
played, touch ENTER.
DVD Setup
En
103
Section
22
DVD
Setup