Pioneer AVH-P6800DVD - Manual (Page 54)

Notes
! If you do not use the touch panel keys for 30
seconds, they will be hidden automatically.
! You can go to the next group of touch panel
keys by touching d.
Switching the XM channel
select mode
You have two methods for selecting a channel:
ALL CH mode and CATEGORY mode.
When selecting
ALL CH mode, channels in
any category can be selected. Select
CATEGORY mode to narrow your search down
to only channels in a particular category.
% Touch MODE to select the desired chan-
nel select mode.
Touch
MODE repeatedly to switch between
the two modes.
ALL CH (all channel select mode)
—
CATEGORY (channel category select setting)
Switching between the
detail information display
and preset list display
You can switch the left side of the basic screen
according to your preference.
% Touch LIST.
Touch
LIST repeatedly to switch between the
followings:
Detail information display
—Preset list display
—OFF
Storing and recalling
broadcast stations
If you touch any of the preset tuning keys
P1
—P6 you can easily store up to six broad-
cast stations for later recall with the touch of a
key.
1 Select the channel that you want to
store in memory.
2 Touch LIST to display the preset list.
# When the touch panel keys are not displayed,
you can display them by touching the screen.
3 Touch and hold a preset tuning key
P1 —P6 until the XM preset number stops
flashing.
The number you have touched will flash in the
XM preset number indicator and then remain
lit. The selected station has been stored in
memory.
The next time you touch the same preset tun-
ing key
P1
—P6 the station is recalled from
memory.
Notes
! Up to 18 stations, six for each of three XM
bands can be stored in memory.
! You can also use a and b to recall stations
assigned to preset tuning keys P1 —P6 when
the ALL CH mode is selected.
Selecting a channel
Selecting a channel in the
channel category
1 Touch MODE to select the channel cate-
gory select mode.
CATEGORY appears on the information bar.
XM tuner (GEX-P920XM)
En
54
Section
12