Pioneer DV-440 - Manual (Page 24)

24
En
Using the Setup Screen
Menus
The procedure on this page describes how to operate the
menus on the Setup screen. These menus are used to
set and adjust a number of system settings. The various
functions that can be adjusted are covered throughout
this manual. The procedure on this page provides a basic
outline for using the Setup screen menus.
When setting up for the first time
It is recommended to set up player using the Setup
Navigator (page 17). If you selected [Auto Start Off]
when the Setup Navigator appeared, you may still set up
the player using the Setup Navigator in the General menu
screen.
If you choose not to use the Setup Navigator, be sure to
make the necessary settings in the Setup screen
Audio 1, Audio 2, Video 1, Video 2 and Language
menus as described on the following pages.
Some DVDs start playing automatically when loaded in
the player. If a DVD has been loaded, be sure to press
STOP
7 before proceeding.
1
Press ( STANDBY/ON on the front
panel).
2
Press SETUP.
The Setup screen appears.
3
Use the cursor buttons (
2/3) to select the
menu you want.
As each menu is selected with the cursor, the
settings appear below the menu heading.
4
Use the cursor buttons (
∞) to enter the
menu.
The top item within the menu becomes highlighted.
5
Use the cursor buttons (
5/∞) to select the
setting you want to change.
The options available for each setting appear to the
right when the setting is selected. The current
setting appears with the setting indicator lit.
6
Use the cursor buttons (
3) to enter the
setting options.
• Not all menu options can be changed while a disc
is playing. In these cases, the options appear
grayed out on the screen and cannot be adjusted.
To change these settings, press STOP
7 first
before pressing SETUP.
• Operating the menu after pressing STOP
7 may
cancel the resume function.
• Some menu options are not immediately
effective if set while a disc is playing. To make
these settings effective, stop playback and then
start again, or change the settings while the disc
is stopped.
Example
Adjusting Audio
and Video
Settings
continued
V2 Video1 General A2 Language
Exit Move
Audio DRC
Dolby Digital Out
DTS Out
96kHz PCM Out
MPEG Out
Audio1
—
—
—
—
— Off
Dolby Digital
Off
96kHz
3 48kHz
MPEG 3 PCM
Setup audio
Digital output format/tone adjust
SETUP
Example
—
—
—
SETUP ENTER
V2 Video1 General A2 Language
Exit Move Select
Audio DRC
Dolby Digital Out
DTS Out
96kHz PCM Out
MPEG Out
Audio1
Off
Dolby Digital
Dolby Digital
3 PCM
96kHz 3 48kHz
MPEG 3 PCM
Change Dolby Digital output mode
Example
—
—
—
V2 Video1 General A2 Language
Audio DRC
Dolby Digital Out
DTS Out
96kHz PCM Out
MPEG Out
Audio1
Off
Dolby Digital
Dolby Digital 3 PCM
96kHz 3 48kHz
MPEG 3 PCM
Output Dolby Digital
SETUP ENTER Exit Move Select
RANDOM PROGRAM SEARCH MODE
0 9 8 7
+10 6 5 4
CLEAR 3 2 1
1 REV FWD ¡
PLAY 3 PAUSE 8 STOP 7
e STEP/SLOW E
NEXT
¢ PREV
RETURN
REPEAT
CONDITION
MEMORY
LAST
MEMORY
ANGLE SUB TITLE AUDIO
SETUP MENU TOP MENU
DISPLAY
¶
5
∞
3 2
Î
¶
OPEN/
CLOSE
REPEAT
A-B
¶
¶ 5
5
5 5
EN TER
4
¶
¶
1
2
3, 4, 5, 6
1
Î 8 7 ¡ ¢ 4 1 STANDBY/ON 0 3
DVD PLAYER
MIC VOLUME
MIN–MAX MIN–MAX
ECHO
DV-533K