Pioneer DV-440 - Manual (Page 48)

48
En
Continuing Playback from a
Specified Location
(Last Memory)
– DVD/Super VCD/Video CD
The Last Memory function is convenient when you want
to continue viewing a disc from the point where you
were watching before. Unlike the resume function, the
Last Memory function is effective even if the DVD is
removed from the player (Last Memory locations saved
for Super VCDs/Video CDs are effective only if the disc
remains loaded in the player).
Last Memory may not work reliably with some Video
CDs that feature PBC.
Memorizing a Last Memory
location to return to later
1
Press LAST MEMORY during play.
The “LAST” indicator lights on the player.
2
Press to turn the power to standby, or
stop playback with STOP
7.
Once memorized, the memorized point will be
recalled even if the power is turned off, or if the
disc is ejected. Points on up to 5 discs can be
memorized, and those points are recalled the next
time any of the discs are played back.
• A Last Memory point can be memorized for only
one Super VCD/Video CD at a time as the
function is only effective until the Super VCD/
Video CD is removed from the player.
RANDOM PROGRAM SEARCH MODE
0 9 8 7
+10 6 5 4
CLEAR 3 2 1
1 REV FWD ¡
PLAY 3 PAUSE 8 STOP 7
e STEP/SLOW E
NEXT
¢ PREV
RETURN
REPEAT
CONDITION
MEMORY
LAST
MEMORY
ANGLE SUB TITLE AUDIO
SETUP MENU TOP MENU
DISPLAY
¶
5
∞
3 2
Î
¶
OPEN/
CLOSE
REPEAT
A-B
¶
¶ 5
5
5 5
EN TER
4
¶
¶
LAST
MEMORY
STOP 7 PLAY 3
CLEAR
Resuming playback from where
LAST MEMORY was pressed
1
Load a disc that has a Last Memory point
memorized.
Some DVDs will start playback automatically when
loaded. In this case, press STOP
7 to stop
playback.
2
Press LAST MEMORY while in the stop
mode.
The disc begins playback at the memorized point.
• Last Memory mode may not function for some
DVDs.
• You can use Last Memory for up to five discs
(after that the one used least recently is deleted
to make space for a new one).
• Even with a disc you have memorized with Last
Memory, playback begins at the start of the disc
if you press PLAY
3.
• This function is for playback of DVDs or Super
VCDs/Video CDs only. You cannot use it with
CDs and MP3s.
To clear the Last Memory location
1
Load a disc that has a Last Memory point
memorized.
Some DVDs will start playback automatically when
loaded. In this case, press STOP
7 to stop
playback.
2
Press LAST MEMORY while in the stop
mode.
The disc begins playback at the memorized point.
3
Once the picture appears, press LAST
MEMORY again.
4
While “Last Memory” is displayed on the
screen, press CLEAR.
The “LAST” indicator disappears from the display.