Procom EN250RYLB-O - Manual (Page 21)

2 1
Install the decorating logs.
Fasten decorating logs 1 ¡¢ ¡¢ ¡¢ ¡¢ ¡¢ 2 ¡¢ ¡¢ ¡¢ ¡¢ ¡¢ 3 onto the correspondent angle iron (Figure 4).
Insert the pinhole on the upper part of log 4 into the pin on the left side of log 1. Place the lower part on
the flat roof at the left side of log 3 (Figure 5).
Insert the pinhole on the upper side of log 5 into the pin on the right side of log 1. Place the lower part on
the flat roof at the right side of log 3 (Figure 6).
Figure 3
Figure 5
Figure 4
Figure 6