Panasonic AJ-HPX2000 - Manual (Page 169)

169 Menu : Menu Description Tables
Me
n
u
ZEBRA Pattern Display
The ____ in the Adjustable Range column indicates the
preset mode.
VF
VF DISPLAY
Items/
Data Saved
Adjustable
Range
Remarks
DISP
CONDITION NORMAL
HOLD NORMAL: Display status constantly.
HOLD:
Display status only when the
MODE CHECK switch is
pressed.
– C U F R
DISP MODE 1
2
3 Set the DISP MODE.
Switch the camera’s Warning/Message
indication. Please refer to [Display
Modes and Setting Changes/adjustment
Result Messages
] (page 78) for more
information.
– C U F R
VF OUT Y
NAM
R
G
B For selecting the video signals to display
in the viewfinder screen.
Y:
Brightness signal
NAM: Output signal with the highest
level among R, G, and B signals.
R: Rch signal
G: Gch signal
B: Bch signal
– C U F R
VF DTL 0
:
5
For setting the detail level of the
viewfinder screen.
The details of the signals for the
viewfinder are further enhanced. If 0 is
selected, then the detail is the same as
that for the main line.
– C U F R
ZEBRA1
DETECT 0%
:
70%
:
109%
Set the ZEBRA1 detection level (IRE
value).
– C U F R
ZEBRA2
DETECT 0%
:
85%
:
109%
Set the ZEBRA2 detection level (IRE
value).
– C U F R
ZEBRA2 ON
SPOT
OFF Set the ZEBRA2 to ON, OFF, or SPOT.
– C U F R
LOW LIGHT
LVL OFF
10%
15%
20%
25%
30%
35% Set the camera incoming light volume at
which to display LOW LIGHT.
– C U F R
RC MENU
DISP. ON
OFF For the setting to display the menu in the
viewfinder screen when the remote
control unit is connected to the unit.
– C U F R
50M
INDICATOR ON
OFF For specifying whether to enable or
disable the 50M LED inside the SD
viewfinder when the REC MODE menu
option is set to DVCPRO50. (In SD
mode only
– C U F R
MARKER/
CHAR LVL 50%
60%
70%
80%
90%
100% Adjust the brightness of markers and
characters displayed on the VF.
– C U F R
SPOT OFF ON
109%
0%
ZEBRA 2
DETECT
ZEBRA 2
ZEBRA 1
DETECT
Video Level
AJ-HPX2000P(VQT1D27-1)E.book 169 ページ ２００７年７月３０日 月曜日 午後１時３１分