Patton electronic ForeFront 3125 - Manual (Page 52)

3 • Configuring the RAS for operation Model 3125 RAS Getting Started Guide
52 Configuring the RAS with a Web browser
Figure 36. MFR Version 2 Modify window
5. Click on the Country pop-up menu. If your country is not available, select ituStandard(1).
6. Click on Submit .
7. Scroll down to the Interregister signaling section.
8. Type the Called Number Total Digits in the box provided. This setting tells the RAS how many digits to
expect from the phone company. The called Number is the number a user dials to call into the RAS.
9. Set the First/Middle and Last Response Codes. These are the codes the switch expects after each digit sent
by the switch.
10. Click on Submit .
11. Type the Calling Number Total Digits in the box provided. This setting tells the RAS how many digits to
expect from the phone company. This number is the calling party’s phone number or Caller-ID informa-
tion.
12. Set the First/Middle and Last Response Codes. These are the codes the switch expects after each digit sent
by the switch.
13. Click on Submit .
signaling is now configured for MFC-R2.