Patton electronic ForeFront 3125 - Manual (Page 55)

Saving your configuration 55
Model 3125 RAS Getting Started Guide 3 • Configuring the RAS for operation
– For T1 lines with ESF/B8ZS this should be set to linkYellowFormatDL(2).
7. Click on Submit Query .
Channel assignment
This section describes configuring the RAS so it will know which channels are active. Do the following:
1. Select T1/E1 Link on the Configuration Menu . The T1/E1 Link Activity window appears (see figure 32 on
page 49).
2. Click on Channel Assignment . The WAN Circuit Channel Assignment window appears (see figure 37 on
page 53).
3. Click on the Dialin button under the Set all channels to: section. Channels 25 through 30 are ignored for
T1/PRI lines.
4. Click on Submit Query .
Saving your configuration
The basic configuration for the RAS is now finished. Do the following to save your configuration settings:
1. Select Home on the Configuration Menu . The Home window appears (see figure 22 on page 41).
2. Click on the Record Current Configuration button (see figure 24 on page 43).
Note Failing to click on the Record Current Configuration button before
you power down or reset the RAS will cause your changes to be lost.
3. The Import/Export function enables you to make a backup (or export) copy of your access server’s configu-
ration parameters. By exporting the configurations, the saved files can quickly be loaded (or imported) into
a replacement access server—greatly speeding up the installation process should an access server need
replacing.
Note All actions for Import/Export require superuser access privileges.