Pitney Bowes ADDRESSRIGHTTM DA900 - Manual (Page 46)

5
Printer Adjustments
5-10 SV60970-OG Rev. A
7. Print Test
Pieces
We recommend that you print a test piece every time you
change any of the adjustments covered in this chapter.
1. Make sure your material conforms to our published speci-
fications and that its loaded properly.
2. Turn the printer on and wait for the Printer Offline prompt
to appear on the operator display.
3. Press the Test Print button on the printer control panel.
The operator display prompts Test Printing Enter to Feed.
4. Press Enter. The envelope feeds and a sample address
prints.
5. Press Enter again to stop printing.
6. Check print quality. If it is not satisfactory, you can make
changes using the setup options available in the DA900
print driver. See Chapter 6.
If your material is not feeding reliably, check all setup ad-
justments in this chapter, particularly the setting of the
media thickness knob.