Pitney Bowes ADDRESSRIGHTTM DA900 - Manual (Page 53)

DA900 AddressRight ™ Printer
6
6 - Print Driver
6-7 SV60970-OG Rev. A
Advanced Options:
Head Adjustment
(Print Heads)
This option permits precise alignment of text or graphic
elements printed by adjacent printheads. You can adjust
the point at which each printhead fires in increments of
0.001 inch. You can delay printing (-) up to a maximum of
0.048 inch or accelerate it (+) up to a maximum of 0.048
inch. The default (normal) value is 0. Click OK when
you've entered the values you want.
The recommended adjustment process is:
1. Use Envelope Designer™ Plus to determine correct
printhead position. Note the location of the printhead
bands relative to the ruler displayed in the envelope
template.
2. Physically position the printheads. See Chapter 5.
3. Run several test pieces to check the alignment of text
and graphic elements.
4. If fine adjustment is required, enter an adjustment
value for the appropriate printhead(s). Continue to ad-
just in small increments and repeat tests until align-
ment is satisfactory.
Hint: For additional in-
formation on printhead
placement, see Appen-
dix B—DA900 Applica-
tion Notes.