Paradise RCP2-1000 - Manual (Page 40)

40 203987 Rev A RCP2-1000 RM Remote Controller Operations Manual
The following procedure will guide the user through the remote terminal setup, using
the Windows 95/98 HyperTerminal software. The RCP2 must be connected to a PC
com port and configured to use TMSP with 9600 Baud rate prior to setting up the PC
configurations.
• Start the Windows HyperTerminal Program (default Windows location at Pro-
grams — Accessories — HyperTerminal).
• Enter the name of your serial connection (“Compact Outdoor SSPA” for ex-
ample), and then click “Ok” button. See Figure 6-1.
• Select direct connection to the PC communication port (Com1 for example),
which meant to be used for communication with SSPA unit, and then click
“OK” Button. See Figure 6-2.
Figure 6-1: Connection Description window
Figure 6-2: Connection window