Polaroid MAXXUM HTsi - Manual (Page 15)

27
USING THE BUILT-IN FLASH
26
USING THE BUILT-IN FLASH
Press the flash-mode button and
turn the control dial until
appears in the data panel.
• Press the flash-mode button and turn the
control dial until appears to return to
autoflash mode.
Fill Flash
Use fill flash when taking pictures under fluorescent lighting or to
eliminate harsh shadows. When set, the flash will fire every time a
picture is taken. The TTL automatic flash metering system will ensure
correct exposure.
Flash Cancel
Use flash cancel when photographing twilight scenes or to capture
the ambiance of existing light.
1. Turn the function dial to .
2. Press the function button and
turn the control dial until
and ON appear in the data
panel.
• Warn your subject that the flash will fire a
few short flash bursts just before the
picture is taken.
Turn the function dial to ,
then press the function button
and turn the control dial until
and OFF appear in the data
panel.
Red-Eye Reduction
Light reflecting from your subject’s eyes may produce the effect
known as red-eye. Use the built-in flash’s red-eye-reduction mode
to produce more natural looking photographs by reducing the red-
eye effect.
Cancelling Red-eye Reduction
The shutter speed may be slow.
Use of a tripod is recommended.
Press the flash-mode button and
turn the control dial until
appears in the data panel.
• Make sure your subject is within the flash
range specified in the table on page 25.
• Press the flash-mode button and turn the
control dial until appears to return to
autoflash mode.
• For quick shots, hold the flash-mode button
down when pressing the shutter-release
button to fire the fill flash.
2154-E (US).qed 3/4/98 2:39 PM Page 26