Polaroid MAXXUM HTsi - Manual (Page 22)

41
A-MODE – APERTURE PRIORITY
40
A-MODE – APERTURE PRIORITY
Press the flash-mode button to
pop-up the built-in flash.
• will appear in the data panel.
• The shutter speed is automatically set to
1/125 or slower.
• A smaller aperture (larger f-number) will
result in a shorter flash range. Refer to
Flash Range (p25) to determine the range
of the built-in flash at the selected aperture.
A-Mode Flash
When the built-in flash is up or an attached accessory flash is on, it
will fire each time a picture is taken. The camera’s TTL automatic
flash metering system will ensure proper exposure.
If 125 blinks in the viewfinder and the
data panel, the light level is too
bright for the selected aperture. Turn
the control dial until the blinking
stops or cancel the flash.
Push the built-in flash down or turn the accessory flash off.
• will be displayed in the data panel.
Cancelling the Flash
The size of the aperture (lens opening) determines the depth-of-field
in the final image as well as the intensity of the light falling on the
film. Depth-of-field is the range in front of and behind the focus point
that appears sharp in the final image. In the viewfinder, only the
plane the camera is focused on will appear sharp. The photographed
image however, will have a depth-of-field corresponding to the
selected aperture.
Large apertures (small numbers) limit the depth-of-field to a narrow
range in front of and behind the point of focus. Set a larger aperture
when photographing portraits to make your subject stand out from
the background.
Small apertures (large numbers) provide greater depth-of-field. Set a
small aperture when photographing landscapes to ensure your entire
scene is sharp.
• Usable apertures will depend on the aperture range of the lens you are using.
Aperture Control
Large Aperture
(small f-number)
Small Aperture
(large f-number)
2154-E (US).qed 3/4/98 2:41 PM Page 40