Polaroid MAXXUM HTsi - Manual (Page 37)

71 70
CUSTOM FUNCTIONS
1 – AF priority
Shutter will not release until or appears in the viewfinder.
Cust 1 – AF Release Priority
Cust 2 – Film Rewind Start
2 – Release Priority
Shutter releases even if the focus cannot be confirmed. Use Release
priority when photographing moving subjects.
• When continuous-advance mode is selected, the camera will not update the
focus while the shutter-release button is pressed.
1 – Automatic
Film is automatically rewound at the end of the roll.
2 – Manual
Press the manual-rewind button to initiate
rewind. (p28).
Cust 3 – Film Tip
1 – Film is completely rewound into the cartridge.
2 – Leader is left out of the
cartridge after rewind.
• Sliding the main switch to LOCK
during rewind causes the film to be
rewound into the cartridge when the
power is switched back on.
CUSTOM FUNCTIONS
1. Turn the function dial to CUST.
2. Turn the control dial to select
the number of the custom
function you want to change.
3. Press the function button and
turn the control dial to select
the desired setting.
4. Turn the function dial to any
position other than CUST.
• The shutter cannot be released if the
function dial is set to CUST.
Setting the Custom Functions
To reset all of the custom functions to their
default setting (1) …
1. Slide the main switch to LOCK.
2. Turn the function dial to CUST.
3. Press the function button and slide the main
switch from LOCK to ON.
• will blink in the data panel.
Using the custom functions, you can tailor selected camera settings
to suit your shooting style or preferences. The functions you can
customize are explained on pages 71-75.
2154-E (US).qed 3/4/98 2:43 PM Page 70