Polaroid MAXXUM HTsi - Manual (Page 36)

69 68
FOR OWNERS OF THE QUARTZ DATE MODEL
1. Open the back cover.
3. Remove the old battery and
replace it with a new one.
• The + side should face up.
2. Using a coin or similar object,
turn the battery cover
counter-clockwise, then
remove it.
4. Replace the battery cover,
then reset the date and time.
Replacing the Battery
The quartz data back uses a CR2025 lithium battery, located on the
inside of the back cover. Replace the battery if the display changes
or becomes dim while the camera batteries are removed.
FOR OWNERS OF THE QUARTZ DATE MODEL
1. Press the MODE button to choose
the data imprinting format.
• M will appear above the month.
2. Use the SELECT button to move
between different parts of the
displayed data.
• The selected part will blink, indicating that it is
the data to be changed.
3. Press the ADJUST button to
change the data to the correct
value.
• Data continues changing as long as the button is
held down.
• In time mode, pressing the ADJUST button while
: is blinking resets the seconds counter to zero
(not shown).
Setting the Date/Time
4. When all data is correct, press the
SELECT button until the data
stops blinking.
2154-E (US).qed 3/4/98 2:43 PM Page 68