Panasonic DX-2000 - Manual (Page 163)

161
Setting Up Your Machine for Relayed Transmission
Programming the End Receiving Station into your Auto Dialer
If the Fax Parameter No. 140 (LAN RELAY XMT REQUEST) is set to "Valid", you can enter the Relay Address
(ABBR No.) by the following procedure.
To set a One-Touch/ABBR for Relayed Transmission Request
1
2
Ex:
3 Press a One-Touch key (01-32).
Ex:
4 To change the input mode (between "ENTER EMAIL
ADDRESS" and "ENTER TEL. NO."), press
.
5 Enter the telephone number (up to 36 digits).
If the Relay and the End Receiving Stations are both in
the same area, omit the Country Code and the Area Code
from the End Receiving Station. The End Receiving
Station is a local telephone number as viewed from the
Relay Station.
6
7 Enter the station name by using the character keys (up to
15 characters).
Ex:
8
Continued on the next page...
FUNCTION
7 2 SET
1:ONE-TOUCH
2:ABBR NO.
1
ONE-TOUCH< >
PRESS ONE-TOUCH
01
<01>
ENTER EMAIL ADDRESS
INTERNET
<01>
ENTER TEL. NO.
<01>
3961111234 ❚
SET <01> ENTER NAME
3961111234
R O M E
<01> ROME ❚
3961111234
SET <01> RELAY ADDRESS
❚❚❚
Relayed Transmission
6