To program one-touch / abbr no. for the first time, Programming or retrieving parameters via email – Panasonic DX-2000 User Manual
Page 58
Advertising
56
To Program One-Touch / ABBR No. for the First Time
Create a script in the message body of a plain text email and send it to the DX-2000’s email address.The
"Subject" line of the email must be as follows:
#set abbr(password)#:
where the password is the Remote Password programmed in the DX-2000’s User
Parameters.
The script sample to program One-Touch / ABBR No. for the first time is shown in the illustration below:
First Time Remote Programming of One-Touch / ABBR No. Sample
(1)
(2)
(3)
(b)
(c)
(d)
(e)
(f)
Programming or Retrieving Parameters via Email
Advertising