Panasonic DX-2000 - Manual (Page 63)

61
(1) To : The DX-2000’s email address.
From : This field is normally not visible when creating new email message(s). It is your default
email address (email application), for retrieving the One-Touch / ABBR No. data and for
error message notification.
(Can be programmed with the configuration tool of your email program.)
Subject : To Store data, type: #set abbr(password)#
(2) @begin to @end block: : Defines the One-Touch Keys, Abbreviated Dialing Numbers and Program Keys stored as a
One-Touch Key to be set in section (3) between @begin to @end block. Edit, Delete or
Register the infomation.
Separate each data field with a semicolon (;). (If the remaining fields are to remain blank,
insert a semicolon (;) for each blank field)
The data string for each station should be defined within a single line. The syntax is:
<Entry-number>;<Station-name>;<Station-address>;<Routing-subaddress>;<Routing-id-
number>;<Telephone number>
(a) Entry-number: One-Touch, ABBR No. or Program Keys to be programmed
000 to 999: indicates ABBR No.s 000 to 999 (160 numbers maximum)
1001 to 1032: indicates One-Touch numbers from 01 to 32
1033 to 1040: indicates Program Keys (P1 to P8 programmed as One-Touch dialing
numbers)
(b) Station-name: Name of the station being programmed (15 alpha-numeric characters
maximum)
(c) Station-address: email address or telephone number of the station being programmed
(d) Routing-subaddress: sub-address to be used for routing (20-digit maximum)
(e) Routing-id-number: TSI to be used for routing (20-digit maximum)
(f)
The End Receiving Station’s telephone number is entered after the hash sign (#)
(3) @program to @end block: : Defines the Program Keys stored as a Group Key or POP Access Key to be set in section
(4) between @program to @end block.
Edit, Delete or Register the infomation.
(a) Program Key: P01 - P08
(b) Station-name as a Group Key: Name of the station being programmed (15 alpha-
numeric characters maximum)
(c) GROUP: The syntax used to set the Program Key as a Group Key
(d) Entry-number: One-Touch, ABBR No. or Program Keys to be programmed
000 to 999: indicates ABBR No.s 000 to 999 (160 stations maximum)
1001 to 1032: indicates One-Touch numbers from 01 to 32
1033 to 1040: indicates Program Keys (P1 to P8 programmed as One-Touch dialing
numbers)
(e) POP: The syntax used to set the Program Key as a POP Access Key
(f)
POP User-name: Name of the station being programmed (40 alpha-numeric
characters maximum)
(g) POP Password: POP Password (10 alpha-numeric characters maximum)
(h) Set whether the emails on the POP Server are deleted after retrieving the emails.
(4) These 2 One-Touch stations were added to the list.
(5) This header must be deleted before the email is sent to the DX-2000 for reprogramming of One-Touch / ABBR No.
The information following the "#" sign is ignored by the DX-2000, therefore, you can leave it as is or delete it if you wish.
Programming or Retrieving Parameters via Email
2