Panasonic WJ-SX 150A - Manual (Page 195)

23
● Normal Playback
The operations are the same as WJ-HD500 Series. (Refer to
p. 19.)
Note: Refer to the recorder’s operating instructions for
details and other playback modes.
● Manual Recording
The operations are the same as WJ-HD500 Series. (Refer to
p. 20.)
● Stopping REC ONLY Alarm
Recording
The operations are the same as WJ-HD500 Series. (Refer to
p. 20.)
■ Search Playback
You can search recorded images through the date and
time.
Every time you press the SEARCH/T&D SEARCH button in
the recorder mode, the monitor display will change as fol-
lows.
Live image
→ Date-and-time entry form → Recording event
list
→ VMD search list → Marking list → Date-and-time
entry form…
The following are the details on LCD display patterns and
function buttons.
LCD display while the event list is displayed on the
monitor
LCD display while the thumbnail menu is displayed on
the monitor
Note: While holding down the SHIFT button, the LCD dis-
play will become as follows.
Available buttons and functions (Common)
F1 button: Thumb or List
Changes the monitor display between the recording
event list window and thumbnail menu.
F3 button: Text
Displays text information of selected event on the
recording event list.
F4 button: Copy
Displays the DATA COPY window while the recording
event, VMD search, or making list window is displayed.
F1 button while holding down the SHIFT button: Nr-A
Specifies the normal or event recording area for the
playback media.
F2 button while holding down the SHIFT button: Cp-A
Specifies the copy area for the playback media.
F3 button while holding down the SHIFT button: Cpy1
This button is reserved for future use.
F4 button while holding down the SHIFT button: Cpy2
This button is reserved for future use.
Notes:
• The monitor display is not changed even if pressing the
F1 button while the date-and-time entry form is dis-
played.
• To close the monitor display activated by the function
buttons, press the MON (ESC) button.
• The DATA COPY window is not displayed while a
thumbnail window is displayed.
• Refer to the operating instructions of recorder for details
on each function.
Available buttons and functions (Text information)
<Main unit>
CAM (SET), MON (ESC), or EXIT button: Returns to
the upper menu.
Note: Text editing is not available.
Available buttons and functions (DATA COPY window)
<Main unit>
JogDial clockwise: Increments a parameter.
JogDial counterclockwise: Decrements a parameter.
CAM (SET) button: Executes the selection and starts
data copy. (If "OK" is selected) / Cancels the selec-
tion and returns to the upper menu. (If "CANCEL" is
selected)
MON (ESC) or EXIT button: Cancels the selection and
returns to the upper menu.
<3D joystick unit>
3D joystick upward (D): Moves the cursor up.
3D joystick downward (C): Moves the cursor down.
3D joystick leftward (A): Moves the cursor to the left.
3D joystick rightward (B): Moves the cursor to the
right.
Search Mode /HD300
Thumb Text Copy
F1 F2 F3 F4
Search Mode /HD300
List Text Copy
F1 F2 F3 F4
Search Mode /HD300
Nr-A Cp-A Cpy1 Cpy2
F1 F2 F3 F4