Operations, Recording, 1] press [ 1 ] (play) – Panasonic NV-VP32 User Manual

Page 17: 2] press [ ; / d ], then press [rec, 3] start play on the other equipment, 4] press [ ; / d ] to start recording, One-touch recording (otr), Recording from an external source, Tape refresh, Full-open

Advertising

VHS

Operations

Recording

You can start recording quickly and set a duration.

..............................................................................................................................................................................................................................................................................................................................

During recording, press [

¥REC/OTR] on the unit repeatedly.

Select the desired recording duration.

≥Each time you press the button, the indication on the unit’s display changes as follows:

Counter display (normal recording mode)

>OFF 30 (min.)>OFF 60 (min.)>OFF 90 (min.)>

OFF 120 (min.)

>OFF 180 (min.)>OFF 240 (min.)>Current time (normal recording mode)

≥The unit will automatically switch off when OTR is completed.

¬ To stop OTR at any time
Press [

∫] or [Í/I] (VHSÍ).

Notes:
≥The OTR function works during normal recording only.
≥When the tape reaches its end during OTR, the unit will turn itself off.

You can record from other video sources (VHS, camera, etc.).
≥Connect the other equipment to this unit as shown. If audio output on the other equipment is

monaural, use a stereo-monaural conversion cable (not supplied).

≥Insert a recorded cassette tape with an intact erasure prevention tab.
≥Set A1 or A2 with [INPUT SELECT] to select the audio/video source required.

[1] Press [

1] (PLAY).

Find the recording start point.

[2] Press [

;/D], then press [REC¥].

Put the unit in the recording standby mode.

[3] Start play on the other equipment.

[4] Press

[;/D] to start recording.

¬ To stop recording
Press [

∫].

You can delete all contents in a cassette’s (the picture, the sound and the Jet Navigator data).

[1] Insert a cassette that you want to delete the cassette’s

contents.

[2] Press [MENU] to display the main menu on the screen.

[3] Press [

34] to select the “TAPE REFRESH”, and press

[ENTER].

[4] Press [ENTER] for 2 seconds or more to start the tape

refresh function.

The tape refresh function starts.

≥The tape is rewound to the beginning, and it is fast-forwarded with erasing the tape.
≥When the tape reaches the end, this unit automatically rewinds it to the beginning.

Note:
≥When a video cassette with a broken erasure prevention tab is inserted, this function is not

activated.

One-Touch Recording (OTR)

/ I

EJECT

FULL-OPEN

PLAY

/REW

FF/

STOP

REC/OTR

j AUDIO j

VIDEO

AV2 IN

REC/OTR

STOP

Recording from an external source

AUDIO

OUT

VIDEO

OUT

R-AUDIO-L

VIDEO

R-AUDIO-L

VIDEO

VHS/DVD

OUT

AV1 IN

/ I

EJECT

FULL-OPEN

PLAY

/REW

FF/

STOP

REC/OTR

j AUDIO j

VIDEO

AV2 IN

AV2 IN (AUDIO/VIDEO)

AV1 IN (AUDIO/VIDEO)